Windows 7 + RAID 1 (PCI Controller)

[flax]

Hi!

After changing to a new Windows 7 PC Everything doesn't found anything on a hdd e: which is connected to the mainboard through a PCI RAID controller with VIA chipset.

With the old PC, XP + RAID controller on mainboard there was no problem.

Is there any trick?

Options on the drives tab in tools are the same like drive c:, chkdsk show no errors, and type is ntfs ... Using Everything zip version

Greetinx
flax

[void]

Are there any errors reported in your Errorlog.txt file in your "Everything" installation folder?

[flax]

Sorry, there is no error logfile.

I also tried the everything with installer, complete deinstallation + registry cleaning -> no difference, hdd on raid controller isn't in database

??

Greetinx
flax

[void]

What does fsutil say about your ntfs information?

To get ntfs information from fsutil:

• From the Start menu, click Run.
• Type in

  Code: Select all

  cmd

  and press Enter.
• In the command prompt:
• Type in

  Code: Select all

  fsutil fsinfo ntfsinfo e:

  and press Enter.
• What is the output of fsutil?

[flax]

What does fsutil say about your ntfs information?

To get ntfs information from fsutil:

• From the Start menu, click Run.
• Type in

  Code: Select all

  cmd

  and press Enter.
• In the command prompt:
• Type in

  Code: Select all

  fsutil fsinfo ntfsinfo e:

  and press Enter.
• What is the output of fsutil?

Here is the output (in german):

Code: Select all

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. Alle Rechte vorbehalten.

C:\Windows\system32>fsutil fsinfo ntfsinfo e:
Version :                           3.1
Anzahl der Sektoren :               0x0000000074705980
Gesamtzahl Cluster :                0x000000000e8e0b30
Freie Cluster :                     0x00000000072b2fd8
Insgesamt reserviert :              0x0000000000001cf0
Bytes pro Sektor :                  512
Bytes pro Cluster :                 4096
Bytes pro Dateidatensatzsegment :   1024
Cluster pro Dateidatensatzsegment : 0
MFT-gültige Datenlänge :            0x0000000006a18000
MFT-Start-LCN :                     0x0000000000000002
MFT2-Start-LCN :                    0x000000000575ac05
MFT-Zonenstart :                    0x000000000735a360
MFT-Zoneende :                      0x0000000007366b80

I didn't understand it

flax

[void]

Please try the following:

• Exit "Everything".
• Rename your Everything.ini file in your "Everything" installation folder to Everything.backup.ini
• Run "Everything" with the command line option -debug, for example:

  Code: Select all

  Everything.exe -debug

• When "Everything" has finisehd indexing, what is displayed in the debug console ?

[flax]

Hello Void!

I do it, but not so much happened: At the beginning Everything shows ~ 126.000 objects in the statusbar and this counter increase very, very slowly. Now - 4 hours later - there are ~132.000 objects but i don't see files within path e:/....

A Screenshot from the debugger is here

Screenshot debugger

screenshot.1.png (20.71 KiB) Viewed 6342 times

I use TreeSize free to look how much files are on the hdd's: it show's ~ 194.318 with and 130.715 files without E:/

Sorry a lot of work to you Thank you

Bye
flax